Racelogic USER GUIDE Instrukcja Użytkownika Pobierz pdf (Strona 47)

RACELOGIC Traction Control Manual V3.0

Page 47

3.3 Slip Control

The severity of the misfires can be changed by modifying any of the cut

tables.

Sequence 1,2 & 3

Placing a

will allow an injector to fire, putting a will prevent the injector

from firing.

To quickly set all to either fire or non-fire, use the appropriate button in the

‘Set all to’.

Assert at

When a

manual adjuster is fitted, the level set i.e. 5% is known as the ‘set

allowable level’. If no adjuster is fitted, the ‘set allowable level’ is set to 0.

Assert at is the value at which the cut table is used above the ‘set allowable

level’.

e.g. Manual adjuster set to 10%

Sequence 1 ‘assert at’ is set to 5%

The traction control will allow the wheels to have a maximum 10% of slip.

Then at 15% slip (Manual adjuster + assert at) the traction control will

start to reduce power using cut sequence 1 until it returns to a maximum

of 10% slip.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 66 67

Brak uwag

Racelogic USER GUIDE Instrukcja Użytkownika Strona 47