Racelogic USER GUIDE Instrukcja Użytkownika Pobierz pdf (Strona 9)

RACELOGIC Traction Control Manual V3.0

Page 9

1.4.4 Connectors

We highly recommend using the 8 way multilok connectors when interfacing the

traction control with the vehicle, by doing this the car can be easily returned to

standard.

Connect each wire from the Traction Control Loom to each of the injector signal wires

as shown below

 Cut the signal wire and strip each end exposing the cores.

 Crimp a male contact to the ECU side and a female contact to the Injector

side.

 Insert into the appropriate 8 way multilok connector making sure that when

the connectors are placed together, the connection is remade.

 Repeat the above process for each of the signal wires.

The injector cut inputs and outputs wires have the following colours.

Traction Control Inputs and Outputs (4 Cylinder)

Input Pin No Signal Input (Colour) Output Pin No Signal Output (Colour)

8 Red 11 Red/Black

9 Orange 12 Orange/Black

22 Grey 25 Grey/Black

23 Green 24 Green/Black

Additional Inputs/Outputs (6 Cylinder)

10 Yellow 13 Yellow/Black

21 Pink 26 Pink/Black

For example channel 1 of the traction control should be connected as in Diagram 4.

Diagram 4 – Example Connection

Traction

Control

EMS

Red

Red/Black

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 66 67

Brak uwag

Racelogic USER GUIDE Instrukcja Użytkownika Strona 9